مشخصات پژوهش

عنوان	A comprehensive comparison between the effect of elevated temperature constrained groove pressing on the microstructural evolutions, crystallographic texture, and mechanical properties of Al 2024 and Mg AZ91D alloys
نوع پژوهش	مقاله چاپ‌شده در مجلات علمی
کلیدواژه‌ها	2024 Al alloy, AZ91D Mg alloy, constrained groove pressing, microstructure, mechanical properties
چکیده	In the present research work, constrained groove pressing as one of the sheet’s severe plastic deformation is employed at elevated temperature to investigate the influence of this technique on the microstructural evolutions and mechanical properties of 2024 aluminum and AZ91D magnesium alloy sheets. With this regard, three cycles of constrained groove pressing have been conducted on these alloys’ annealed sheets. Optical microscopy and X-ray diffraction were used to discuss the microstructure and crystallographic texture evolution. Results demonstrated that the average grain size of the annealed specimens was decreased to 11 μm and 14 μm after one pass at 300°C for 2024 Al and AZ91D Mg alloys, respectively. By measuring the microhardness, it was found that the annealed sample has the highest homogeneity with the minimum inhomogeneity factor 5.80 and 1.86 for the 2024 Al and AZ91D Mg alloys, respectively. The ultimate tensile strength of the annealed sheet was respectively increased up to 21% and 7% for these alloys by performing the first constrained groove pressing pass. Also, all of the mechanical properties variations are changed based on crystallographic texture evolutions.
پژوهشگران	فرامرز فرشته صنیعی (نفر اول)، صادق قربانحسینی (نفر دوم)، سعید یعقوبی (نفر سوم)