Gholam Hossein Majzoobi

Tribological behaviour of Ti/HA and Ti/SiO2 functionally graded materials fabricated at different strain rates Gholam Hossein Majzoobi, , , , Sajeewa S. N. Maharachchikumbura (2023)

Determination of the parameters of material models using dynamic indentation test and artificial neural network , Gholam Hossein Majzoobi (2023)

On the effect of Cr/CrN nanolayered coating deposited by Arc-PVD method on axial fretting fatigue behavior of Al7075-T6 alloy , Gholam Hossein Majzoobi, Hassan Elmkhah (2023)

A study on damage evolution in Cu–TiO2 composite fabricated using powder metallurgy followed by hot extrusion Gholam Hossein Majzoobi, , (2022)

Thermal properties of Mg-B4C micro and nanocomposites fabricated by static and dynamic compaction methods , Gholam Hossein Majzoobi, , Ali Sadooghi (2022)

Effect of projectile nose on high‐velocity impact behavior of fiber metal laminates Gholam Hossein Majzoobi, , Mohsen K. Keshavarz, (2022)

An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model , Gholam Hossein Majzoobi (2021)

Determination of stress–strain curves of materials at high strain rates using dynamic indentation technique , Gholam Hossein Majzoobi (2021)

Comprehensive study on quasi-static and dynamic mechanical properties and wear behavior of Mg–B4C composite compacted at several loading rates through powder metallurgy , Gholam Hossein Majzoobi, ghasem ebrahimi, (2021)

The effect of particle size on microstructure, relative density and indentation load of Mg-B 4 C composites fabricated at different loading rates , Gholam Hossein Majzoobi (2020)

The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates Gholam Hossein Majzoobi, , (2020)

Mechanical characterization of Mg-B4C nanocomposite fabricated at different strain rates Gholam Hossein Majzoobi, (2020)

Role of sonication time on mechanical properties of graphene oxide/epoxy nanocomposites under quasi-static loading conditions , Gholam Hossein Majzoobi, seyed alireza Sabet (2019)

Mechanical characterization of graphene oxide reinforced epoxy at different strain rates Gholam Hossein Majzoobi, , seyed alireza Sabet (2019)

Experimental and numerical study of high strain rate property of pure copper processed by ECAE method S Sulaiman, jamshid nemati, Gholam Hossein Majzoobi, M. AlJermi (2019)

Investigation of microstructure effect on fretting fatigue crack initiation using crystal plasticity k MINAII, Gholamhossein Farrahi, Morad Karimpour, Hamid Bahai, Gholam Hossein Majzoobi (2019)

Development of a new technique for measuring damage accumulation at high strain rates , Gholam Hossein Majzoobi, Ehsan Khademi, (2019)

A new overall nonlinear damage model for fiber metal laminates based on continuum damage mechanics , Gholam Hossein Majzoobi, Nicola Bonora, Gianluca Iannitti, Andrew Ruggiero, Ehsan Khademi (2019)

Estimation of axial fretting fatigue life at elevated temperatures using critical distance theory Gholam Hossein Majzoobi, (2018)

Effect of out-of-phase loading on fretting fatigue response of Al7075-T6 under cyclic normal loading using a new testing apparatus , Gholam Hossein Majzoobi (2018) ENGINEERING FRACTURE MECHANICS: 188; 93-111

A novel approach to calibrate the Drucker–Prager Cap model for Al7075 powder َA Atrian, Gholam Hossein Majzoobi, Bernd Markert, Seyed Hassan Nourbakhsh (2018) ARCHIVE OF APPLIED MECHANICS: (10)88; 1859-1876

An investigation into the effect of elevated temperatures on fretting fatigue response under cyclic normal contact loading , Gholam Hossein Majzoobi (2018) THEORETICAL AND APPLIED FRACTURE MECHANICS: 93; 144-154

A new constitutive bulk material model to predict the uniaxial tensile nonlinear behavior of fiber metal laminates Gholam Hossein Majzoobi, , َAlexsandre Bonora, Gianluca Lattinni, Andrew Ruggiero, (2018) JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN: (1)53; 26-35

Developing a new experimental set up to study fretting fatigue behavior under cyclic contact loading , Gholam Hossein Majzoobi, Mohammad Mehdi Barjesteh (2017) PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY: DOI: 10.1177/1350650117732673; 1-14

Effect of Contact Pressure On Fretting Fatigue Behavior under Cyclic Contact Loading , Gholam Hossein Majzoobi (2017) SURFACE REVIEW AND LETTERS: 24; 1-17

A study on fiber metal laminates by using a new damage model for composite layer , Gholam Hossein Majzoobi, َAlexsandre Bonora, Gianluca Lattinni, Andrew Ruggiero, (2017) INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES: 131-132; 75-80

On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading Gholam Hossein Majzoobi, (2017) SURFACE & COATINGS TECHNOLOGY: 328; 292-303

The Ballistic Behavior of High Strength, Low Alloy-100 Steel at Sub-zero Temperatures Gholam Hossein Majzoobi, S. Moradi (2016) International Journal of Engineering: 29; 1747-1756

Evaluation of tensile strength of Al7075-SiC nanocomposite compacted by gas gun using spherical indentation test and neural networks َA Atrian, Gholam Hossein Majzoobi, Sayyed Hassan Nourbakhsh Shourabi, Seyyed Ali Gallehdari, Reza Masoudi Nejad (2016) ADVANCED POWDER TECHNOLOGY: 27; 1821-1827

Ductile to brittle failure transition of HSLA-100 Steel at high strain rates and subzero temperatures Gholam Hossein Majzoobi, Amir Hossein Mahmoudi, S. Moradi (2016) ENGINEERING FRACTURE MECHANICS: 158; 179-193

An Experimental Investigation on the Strain Rate Sensitivity of a Severely Deformed Aluminum Alloy Faramarz Fereshteh-Saniee, , Saeed lahmi, Gholam Hossein Majzoobi (2015) EXPERIMENTAL MECHANICS: 111; 111

Effect of densification rate on consolidation and properties of Al7075–B4C composite powder Gholam Hossein Majzoobi, َA Atrian, Mohammad pipelzadeh (2015) POWDER METALLURGY AND METAL CERAMICS: 1; 1-11

A constitutive model for hardness considering the effects of strain, strain rate and temperature Gholam Hossein Majzoobi, , Mohammad pipelzadeh, Saeed lahmi, stephan hardy (2015) JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN: 50; 284-298

Fretting Fatigue Life Estimation of Al 7075-T6 Using Plain Fatigue Test Gholam Hossein Majzoobi, k MINAII (2015) TRIBOLOGY TRANSACTIONS: 57:4; 613-621

A comparative study on hot dynamic compaction and quasi-static hot pressing of Al7075/SiCnp nanocomposite َA Atrian, Gholam Hossein Majzoobi, mohammad hossein enayati, (2015) ADVANCED POWDER TECHNOLOGY: 26; 73-82

A new approach for the correction of stress–strain curves after necking in metals Gholam Hossein Majzoobi, , Mohammad pipelzadeh, stephan hardy (2014) JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN: 1; 1-13

Determination of the Constants of Material Models Using Inverse Taylor Test Gholam Hossein Majzoobi, (2014) EXPERIMENTAL TECHNIQUES: 10.1111/ext.12100; 1747-1567

Improvement of performance of bolt-nut connections, Part II: Experimental investigation Gholam Hossein Majzoobi, M Agh Mohammad Dabbagh, P asgari, Mohammad pipelzadeh, SJ hardy (2014) journal of Mechanical Engineering Science: 0; 1-12

Numerical implementation of a new coupled cyclic plasticity and continum damage model N bonora, Gholam Hossein Majzoobi, (2014) COMPUTATIONAL MATERIALS SCIENCE: 81; 538-547

A New Investigation on the Effect of Re-shot Peening on Fretting Fatigue Behavior of A17075-T6 Gholam Hossein Majzoobi, (2013) TRIBOLOGY TRANSACTIONS: 56; 943-952