Rahman Seifi

Research activities

Journal Papers

An approach to predicting corrosion fatigue for marine applications , Amir Hossein Mahmoudi, Rahman Seifi (2023)

Study of stress intensity factors in sliding and tearing modes for subsurface elliptical cracks in rolling train wheels Rahman Seifi, mohammad asadi-dalir (2023)

Determination of dynamic deformation behavior of Golden Delicious apple using finite element method and its validation by scanning electron microscopy , Ebrahim Ahmadi, Ali Alavi Nia, Rahman Seifi (2022)

An investigation on the crack growth in aluminum alloy 7075-T6 under cyclic mechanical and thermal loads , Rahman Seifi, (2022)

Investigating the Microstructure, Hardness and Tensile Behavior of Magnesium AZ80 Alloy and AZ80/SiC Nanocomposite Manufactured Through Dual Equal Channel Lateral Extrusion (DECLE) Mohammad Amin Salavati, A. Imam, Rahman Seifi, F. Akbaripanah (2021)

Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance Rahman Seifi, (2021)

Fatigue crack growth determination based on cyclic plastic zone and cyclic J‐integral in kinematic–isotropic hardening materials with considering Chaboche model , Rahman Seifi (2020)

Fatigue life estimation of the overloaded notched components Rahman Seifi, (2020)

Analysis of free vibration of an isotropic plate with surface or internal long crack using generalized differential quadrature method , Rahman Seifi (2020)

Mixed‑mode fracture toughness versus thickness and yield strength in aluminum alloys Rahman Seifi, (2019)

Customized weight function for cracks initiated from semi-circular notches , Rahman Seifi (2019)

Buckling analysis of cracked laminated plates by domain decomposition method Rahman Seifi, (2019)

Study of hardening and cyclic plastic behaviour around the crack tip of C(T) specimen made by as‐received and annealed copper , Rahman Seifi (2019)

A generalized weight function for cracks emanated from sharp and blunt V- notches , Rahman Seifi (2018)

Enhancement anaerobic digestion and methane production from kitchen waste by thermal and thermo-chemical pretreatments in batch leach bed reactor with down flow , Hossein Hajy Agha Alizade, Rahman Seifi (2018)

An investigation on the effects of equal channel angular pressing on the mixed‐mode fracture toughness and mechanical properties of 6063 aluminium alloy Rahman Seifi, (2018)

Eﬀects of crack orientation on the fatigue crack growth rate and fracture toughness of AA6063 alloy deformed by ECAP , Rahman Seifi (2018)

Maximizing working pressure of autofrettaged three layer compound cylinders with considering Bauschinger effect and reverse yielding Rahman Seifi (2018)

Effects of Tensile Overload on Crack Initiation Life and Fatigue Crack Growth in Notched Specimens Rahman Seifi, (2018)

Total fatigue lives, crack growth paths and cycles in cold expanded adjacent holes Rahman Seifi (2018)

Experimental study of fatigue crack growth in raw and annealed pure copper with considering cyclic plastic eﬀects Rahman Seifi, (2018)

Axial buckling of perforated plates reinforced with strips and middle tubes Rahman Seifi, , (2017)

Inﬂuence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens , Rahman Seifi (2017)

Effects of Contact Surface Roughness of Interference Shaft/Bush Joints on its Characteristics Rahman Seifi, , Masood Asayesh (2017)

Evaluation of the anaerobic digestion of kitchen waste by thermal pretreatment in a batch leach bed reactor with down flow and the kinetics of methane yields Hossein Hajy Agha Alizade, Rahman Seifi, (2016)

Effects of internal pressure on bending buckling of imperfect functionally graded thin cylinders Rahman Seifi, Moslem Avatefi (2016)

Friction coefﬁcient estimation in shaft/bush interference using ﬁnite element model updating Rahman Seifi, (2015)

Study on life and path of fatigue cracks in multiple site damage plates Rahman Seifi, Oshin Ghadimian, Milad Ranjbaran (2015)

Buckling of cracked cylindrical panels under axially compressive and tensile loads Rahman Seifi, Hamed Saeidi, Mohammad Farrokhi (2015)

Stress intensity factors for internal surface cracks in autofrettaged functionally graded thick cylinders using weight function method Rahman Seifi (2015)

EXACT AND APPROXIMATE SOLUTIONS OF THERMOELASTIC STRESSES IN FUNCTIONALLY GRADED CYLINDERS Rahman Seifi (2015)

Direct method for deriving equilibrium equations in solid continuous systems mohammad asadi-dalir, Rahman Seifi (2014)

Experimental and numerical study of residual stresses caused by cold expansion of adjacent holes Rahman Seifi, Mohammad Hassan Zolfaghari, Ali Shirazi (2014)

Conference Papers

Influence of Speed Print and Raster Angle on the Mechanical Properties of ABS Polymer Parts Produced by Fused Deposition Modelling Sabereh Bazraee, Rahman Seifi, Saeed Bazraee (2022)

.row3_default .researchActivities .researchTypeContent { opacity: 1; position: static; height: initial; } .row3_default .researchActivities .researchActivitiesWrapper .researchTypeTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; } .row3_default .researchActivities .researchTypeContent table .Gv-Empty { text-align: left; direction: ltr; }