Jalal Basiri Parsa

Research activities

Journal Papers

Fabrication of novel polyethersulfone (PES) photocatalytic membranes with excellent permeability and antifouling properties using TiO2–AgBr–Ag–SBA‑15 nanofllers for cefxime removal . ., Jalal Basiri Parsa (2024)

Cross-flow photocatalytic membrane reactor (PMR) based on TiO2–AgBr–Ag–NH2-MIL-88B (Fe) /poly (ethersulfone) for enhanced removal of cefixime, anti-fouling performance and permeability . ., Jalal Basiri Parsa (2024)

High performance polyethersulfone/TiO2-AgBr-Ag photocatalytic membrane for Cefixime removal from water under visible light . ., Jalal Basiri Parsa (2024)

Promotion of catalytic activity of Pt@Al-Ti doped ZnO nanostructured anodes for direct methanol fuel cells Jalal Basiri Parsa, (2023)

Synergetic photocatalytic fuel cell and CuFe layered doubled hydroxide as photoactivator of persulfate for dramatically electricity generation of organic pollutants degradation , Jalal Basiri Parsa, ramin farnood (2022)

Integrated ozone‑sono‑Fenton for the enhanced degradation of acid orange 7: process optimization and kinetic evaluation Jalal Basiri Parsa, , (2022)

High-efficient photocatalytic fuel cell integrated with periodate activation for electricity production by degradation of refractory organics , Jalal Basiri Parsa (2021)

Highly-efficient degradation of organic pollutants and synchronous electricity generation in a photocatalytic fuel cell based on the catalytic reactions of hydroxyl and chlorine radicals , Jalal Basiri Parsa, ramin farnood (2021)

Electrochemical synthesis of Pd supported on PANI-MWCNTs-SnO2 nanocomposite as a novel catalyst towards ethanol oxidation in alkaline media , Jalal Basiri Parsa (2020)

Promoted electrocatalytic performance of palladium nanoparticles using doped-NiO supporting materials toward ethanol electro-oxidation in alkaline media , Jalal Basiri Parsa (2020)

Polyvinylidene fluoride-graphene oxide membranes for dye removal under visible light irradiation , Tiziana Marino, Jalal Basiri Parsa, Francesco Galiano, Claudia Orsino, Alberto Figoli, Marta Puche, Hermenegildo Garcia (2020)

Modification of ultrafiltration membrane by thermo-responsive Bentonite-poly(N-isopropylacrylamide) nanocomposite to improve its antifouling properties , Jalal Basiri Parsa (2020)

Electrochemical regeneration of granular activated carbon saturated with acid red 18 using a novel modified Ti/Co-MnO2 electrode Jalal Basiri Parsa, , (2019)

Preparation of thermo-responsive PNIPAAm-MWCNT membranes and evaluation of its antifouling properties in dairy wastewater , Jalal Basiri Parsa (2019)

Electrodeposition of polypyrrole/ metal oxide nanocomposites for corrosion protection of mild steel—A comparative study , Jalal Basiri Parsa, (2019)

Electrochemically synthesized polypyrrole/MWCNTs-Al2O3 ternary nanocomposites supported Pt nanoparticles toward methanol oxidation Zohre Merati, Jalal Basiri Parsa, (2018)

Enhancement of the catalytic activity of Pt nanoparticles toward methanol electro-oxidation using doped-SnO2 supporting materials Zohre Merati, Jalal Basiri Parsa (2018)

Electrochemical regeneration of granular activated carbon saturated with Rhodamine B in a fluidized electrochemical reactor Jalal Basiri Parsa, (2017)

Corrigendum to “Removal of fluoride from water by nanocomposites of POPOA/Fe3O4, POPOA/TiO2, POPOT/Fe3O4and POPOT/TiO2: modelling and optimization via RSM” Milad Hojat Ansari, Jalal Basiri Parsa, Zohre Merati, Jalal Arjmandi (2017)

Sono-Fenton regeneration of granular activated carbon saturated with Rhodamine B: Optimization using response surface methodology Jalal Basiri Parsa, (2017)

Electrodeposition of PANI/MWCNT nanocomposite on stainless steel with enhanced electrocatalytic activity for oxygen reduction reaction and electro-Fenton process , Jalal Basiri Parsa (2017)

Electrogeneration of H2O2 using graphite cathode modified with electrochemically synthesized polypyrrole/MWCNT nanocomposite for electro-Fenton process , Jalal Basiri Parsa (2017)

Application of conducting polyaniline, o-a nisidine, o-phenetidine and o-chloroaniline in removal of nitrate from water via electrically switching ion exchange: Modeling and optimization using a responsesurface methodology , Jalal Basiri Parsa, Jalal Arjmandi (2017)

Artificial Neural Network Modeling for Removal of Azo Dye from Aqueous Solutions by Ti Anode Coated with Multiwall Carbon Nanotubes , Jalal Basiri Parsa, Hadi Rezaei Vahidian (2017)

Removal of nitrate from water by conducting polyaniline via electrically switching ion exchange method in a dual cell reactor: Optimizing and modeling , Jalal Basiri Parsa (2016)

ElectrochemicaldegradationofmetronidazolefromaqueoussolutionsusingstainlesssteelanodecoatedwithSnO2nanoparticles:experimentaldesign , Jalal Basiri Parsa (2016)

Removal of ciprofloxacin from aqueous solution by a continuous flow electro-coagulation process Jalal Basiri Parsa, , (2016)

Decolorization of azo dye C.I. Acid Red 33 from aqueous solutions by anodic oxidation on MWCNTs/Ti electrodes , Jalal Basiri Parsa (2015)

Application of response surface methodology for electrochemical oxidation of the C.I. Reactive Orange 7 using flow reactor with Ti/Sb–SnO2 anode Jalal Basiri Parsa, , (2015)

Degradation of azo dye in aqueous solution using Ti anode coated with MWCNTs–TiO2 , Jalal Basiri Parsa (2015)

Degradation of Rhodamine B by an electrochemicalozone generating system consist of a Ti anodecoated with nanocomposite of Sn–Sb–Ni oxide mahmoud Abbasi, Ali Reza Soleymani, Jalal Basiri Parsa (2015)

Degradation of azo dye from aqueous solutionsusing nano-SnO2/Ti electrode prepared byelectrophoretic deposition method: ExperimentalDesign , Jalal Basiri Parsa (2014)

Operation simulation of a recycled electrochemicalozone generator using artificial neural network mahmoud Abbasi, Ali Reza Soleymani, Jalal Basiri Parsa (2014)

Development of a four-layered ANN for simulation of an electrochemical water treatment process Hadi rezaei vahidian, Ali Reza Soleymani, Jalal Basiri Parsa (2014)

Degradation of azo dye C.I. Acid Red 18 in aqueous solution by ozone-electrolysis process Jalal Basiri Parsa, mojde golmirzaei, mahmoud Abbasi (2014)

Conference Papers

Dyes rejection from contaminated water by polymeric membrane fabricated with metal/covalent-organic frameworks , Simin Asadabadi, Jalal Basiri Parsa (2023)

Preparation of thermo-responsive MWCNT-PNIPAAm nano-composite membrane and evaluation its antifouling properties for diary waste treatment Jalal Basiri Parsa, (2018)

Preparation of Pt/Nb-SnCh/Ti electrode by electrodeposition method and its electrochemical performance for methanol oxidation Jalal Basiri Parsa, Zohre Merati (2017)

Electrodeposition ofPt nanoparticles on modified electrodes with metal oxide and investigation of their performance in oxidation of Methanol Jalal Basiri Parsa, Zohre Merati (2017)

artificial neural network modeling of decolorization of rodamine B dye in multiple impinging jet cavitation rector , Jalal Basiri Parsa (2016)

Removal of nitrate from water via electrochemically method by polyaniline: exprimental design Jalal Basiri Parsa, (2015)

Modification of industrial activated carbon powder using acetic acid and phosphoric acid for the adsorption of basic blue ^ dye from aqueous solutions Jalal Basiri Parsa, (2015)

Regeneration of saturated industrial activated carbon powder with prednisolone via electrochemical method in aqueous media Jalal Basiri Parsa, (2015)

Regeneration of saturated industrial activated carbon powder with Rhodamine B via electrochemical method in aqueous media Jalal Basiri Parsa, (2015)

Electrochemical Regeneration of powdered saturated industrial activated carbon with quinoline in aqueous media Jalal Basiri Parsa, (2015)

.row3_default .researchActivities .researchTypeContent { opacity: 1; position: static; height: initial; } .row3_default .researchActivities .researchActivitiesWrapper .researchTypeTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; } .row3_default .researchActivities .researchTypeContent table .Gv-Empty { text-align: left; direction: ltr; }